Erosion and Sediment Control Solutions for Wyoming

Proven perimeter and sediment control solutions for residential, commercial, infrastructure, solar, and remote construction projects across Wyoming.

Erosion and Sediment Control Challenges Unique to Wyoming

Wyoming construction sites encounter erosion and sediment control challenges driven by arid and semi-arid soils, sparse vegetation, wind erosion, and rapid runoff during storm events. Disturbed soils can remain exposed for extended periods, increasing the risk of sediment transport.

 

Projects across Wyoming often involve long linear corridors for transmission, pipelines, highways, and utilities that cross remote and environmentally sensitive areas. Limited natural drainage infrastructure and challenging weather conditions increase the need for erosion and sediment control systems that perform consistently over time.

 

Wyoming projects are subject to stormwater permitting and inspection requirements that emphasize sediment containment and downstream protection, particularly near ephemeral waterways and drainage channels.

ECS SWPPP Installation in Wyoming

Erosion and Construction Services is equipped to mobilize for major infrastructure, energy, industrial, and alternative energy projects.

 

Services are limited to erosion and sediment control scopes aligned with approved SWPPP plans or erosion and sediment control plans and do not include general construction services.

 

In Wyoming, installation, maintenance, and removal services for large-scale erosion and sediment control scopes are provided through our Installation Division, Erosion and Construction Services.

 

We welcome conversations with contractors, developers, and public agencies to review upcoming projects, discuss erosion and sediment control requirements, and determine the best path forward.

Siltworm™ Filter Sock Technology

Construction projects across Wyoming demand erosion and sediment control solutions that perform reliably across expansive landscapes, exposed soils, and extreme weather conditions. From energy and transmission corridors to highway improvements, industrial facilities, and public infrastructure, Wyoming job sites are often defined by long distances, wind exposure, and limited access.

 

Siltworm™ and Bioworm™ provide erosion and sediment control products used on projects throughout the United States and are well suited for Wyoming construction. These products scale efficiently for large and complex projects where material logistics, installation efficiency, and long-term performance are critical to maintaining stormwater compliance.

 

Siltworm™ and Bioworm™ erosion and sediment control products support large-scale construction projects throughout Wyoming, including Central Wyoming, Southern Wyoming, Northern Wyoming, Eastern Wyoming, Western Wyoming, and major transportation, utility, and energy corridors.

Erosion & Sediment Control for Commercial and Land Development Projects in Wyoming

Erosion and Sediment Control for Commercial, Industrial, and Energy Projects in Wyoming

Large commercial and industrial projects across Wyoming include energy facilities, processing plants, mining-adjacent development, manufacturing sites, and large industrial expansions. These projects often involve expansive disturbed areas with limited tolerance for erosion control failures.

 

Energy and resource-related construction in particular requires erosion and sediment control solutions that can be installed efficiently and maintained across large footprints and extended timelines.

 

Siltworm™ supports commercial, industrial, and data center projects by providing erosion and sediment control products that reduce trenching and simplify maintenance. The ability to efficiently cover long runs makes Siltworm™ a practical solution for large scale Wyoming developments.

 

For large commercial, industrial, and energy projects, Erosion and Construction Services  can mobilize to support erosion and sediment control installation, maintenance, and removal scopes.

Erosion and Sediment Control for Infrastructure and Public Projects in Wyoming

Infrastructure and public projects across Wyoming include highway and roadway improvements, bridge construction, utility installations, drainage upgrades, rail corridors, water infrastructure, and public works. These projects frequently span long distances across open and remote terrain.

 

Erosion and sediment control systems must remain effective during wind events, storm runoff, snowmelt, and repeated inspection cycles. Controls must perform reliably across linear corridors, slopes, and drainage features.

 

Siltworm™ is designed to support infrastructure and public projects by reducing trenching and simplifying installation across long linear corridors. Its consistent performance helps teams maintain compliance while minimizing rework on active job sites.

 

For large infrastructure and public erosion and sediment control scopes, Erosion and Construction Services can mobilize to support planning, bidding, and execution phases aligned with approved plans.

Erosion & Sediment Control for Residential Development in Wyoming
Erosion & Sediment Control for Alternative Energy and Long Linear Projects in Wyoming

Erosion and Sediment Control for Alternative Energy and Long Linear Projects in Wyoming

Wyoming supports extensive utility, transmission, pipeline, and long linear infrastructure across remote regions of the state. These projects often involve long corridors through open landscapes where erosion control failures can be costly and difficult to remediate.

 

Bioworm™ is particularly well suited for long linear projects such as solar installations. Bioworm™ is available in an 8 inch diameter and features netting that dissolves over approximately 10 to 20 months depending on site conditions. Both Bioworm™ and Siltworm™ use the same biodegradable fill made from recycled construction soft wood waste that has been kiln dried and remains in place as stabilization occurs.

 

Siltworm™ and Bioworm™ can be used independently or in combination depending on site requirements. Siltworm™ is available in 9 inch, 12 inch, and 18 inch diameters that can be pyramid stacked to achieve equivalent barrier heights of up to 36 inches.

 

Erosion and Construction Services can mobilize for large alternative energy erosion and sediment control scopes and evaluate additional projects where appropriate.

WYOMING-SPECIFIC FAQs

What erosion and sediment control works best for steep slopes in Wyoming?

Steep slopes and concentrated flow paths benefit from erosion and sediment control solutions that install efficiently and remain stable. Siltworm™ and Bioworm™ are well suited for these conditions.

Can erosion and sediment control materials be shipped to Wyoming sites?

Yes. Siltworm™ and Bioworm™ can be shipped directly to construction sites.

How much coverage does Siltworm™ provide per pallet and truckload?

Material efficiency is critical on Wyoming projects. The 9 inch Siltworm™ provides 360 linear feet per pallet and 9,360 linear feet per truckload, allowing project teams to cover significant distances with fewer deliveries and reduced staging requirements.

Bioworm™ provides 540 linear feet per pallet and 12,960 linear feet per truckload, making it especially efficient for long linear projects such as solar installations.

For projects requiring additional capacity, 12 inch and 18 inch Siltworm™ options are available and can be pyramid stacked to achieve the equivalent of a 36 inch barrier.

Siltworm™ has demonstrated the ability to capture 97 percent of sediment under ASTM D7351 testing standards. This test method simulates actual field conditions, providing confidence in performance across real world construction environments.

Can erosion and sediment control installation services be provided in Wyoming?

Yes. Installation, maintenance, and removal services through Erosion and Construction Services are available in Wyoming for large-scale erosion and sediment control scopes.

Supporting Projects Across Wyoming

Siltworm™ and Bioworm™ erosion and sediment control products support large-scale construction projects throughout Wyoming, including Central Wyoming, Southern Wyoming, Northern Wyoming, Eastern Wyoming, Western Wyoming, and major transportation, utility, and energy corridors.

Products can be delivered directly to job sites across the state, supporting residential, commercial, industrial, infrastructure, public, data center, and alternative energy projects of any size.

Erosion and Construction Services are available in Wyoming on a project-based deployment model, with a focus on large-scale erosion and sediment control scopes.

Planning a Project in Wyoming?

Whether you are managing a residential development or a commercial, industrial, infrastructure, public, data center, or alternative energy project, our team is ready to support your erosion and sediment control needs with Siltworm™ and Bioworm™ products and project-based services through Erosion and Construction Services.